前言：本文主要介紹如何在機智云平臺創建一個智能產品、定義功能數據點、生成MCU代碼包并附上修改好的代碼、生成APP代碼編譯附上參考代碼。

需準備的硬件主要有Arduino uno R3、ESP8266

連線方式：A0讀取模擬電壓輸入；Key1接到D6；Key2接到D7；LED接到D4；

1.1 創建新產品

登陸機智云AIoT開發平臺 dev.gizwits.com 創建智能產品

1.2 進入項目可查看信息

什么是Product Key、Product Secret

Product Key又稱產品標識碼，開發者通過機智云后臺創建新產品后，自動生成的一個32位字符串。在機智云的數據庫中是一個唯一的號碼，開發者將ProductKey寫入設備主控MCU后，機智云通過此標識碼對設備進行識別并自動完成注冊。

設備接入機智云的前提是，需要機智云認同這個設備。Productkey是設備接入機智云的一個重要參數，該參數的基本含義是：一款設備識別碼。例如某公司生產空調、熱水器，空調和熱水器是不同款設備，該公司設備接入機智云，至少需要兩個Productkey參數。在開發MCU過程中，需要使用到該參數。

http://docs.gizwits.com/zh-cn/quickstart/noun.html

根據系統的需求添加數據點，可參考本系統數據點

什么是數據點？

數據點即設備產品的功能的抽象，用于描述產品功能及其參數。創建數據點后，設備與云端通訊的數據格式即可確定，設備、機智云可以相互識別設備與機智云互聯互通的數據。

參考：http://docs.gizwits.com/zh-cn/quickstart/UseMCU.html

3.1 創建好數據點后，進行虛擬設備調試

什么是虛擬設備？類似一款仿真器，能夠模擬硬件設備。

虛擬設備是機智云云端可自動生成的一個仿真智能硬件，可模擬要開發或正在開發的智能硬件，來進行云端設備控制、手機APP控制、上報數據等需求。

開發者或企業研發人員在機智云平臺開發時，如果正式的智能硬件產品產品還未完全開發完成，就可以很方便地使用該“虛擬設備”與正式產品的控制APP進行調試和驗證，加快研發周期，降低研發成本。

https://baijiahao.baidu.com/s?id=1725343397578131479&wfr=spider&for=pc

3.2 在機智云APP能夠觀察機智云平臺模擬的數據

根據系統的需要添加或修改數據點信息

4.1 在確定數據點無誤后，點擊MCU開發

4.2 生成代碼包后，把代碼包導入Arduino IDE開發環境的libraries文件中，libraries是Arduino的庫文件，包含自帶的庫文件和用戶添加的外部庫文件

把networkConfig.ino的配網代碼移植到simpleTry.ino,把串口打印的代碼注釋起來，可參考資料分享：史上最詳細的Arduino uno R3接入機智云教程

https://club.gizwits.com/thread-6728-1-1.html

然后根據要求修改代碼，以下僅供參考：

#include #include #include #include int con_ledPin = 13;  //成功連接網絡，13引腳低電平int smokePin = 2;int movePin = 3;int alarmPin = 4;int ledPin = 5;int relayPin1 = 8;int relayPin2 = 9;int firePin = A0;int lightPin = A1;int beepPin = 10;int temhumPin = 11;bool alarmflag = 0;dht myDHT_11;SoftwareSerial mySerial(A2, A3); // A2 -> RX, A3 -> TXGizwits myGizwits;#define  KEY1       6#define  KEY2       7#define  KEY1_SHORT_PRESS 1#define  KEY1_LONG_PRESS  2#define  KEY2_SHORT_PRESS 4#define  KEY2_LONG_PRESS  8#define  NO_KEY      0#define  KEY_LONG_TIMER  3#define  ALARM_SHORT_PRESS 16#define  ALARM_LONG_PRESS 32unsigned long Last_KeyTime = 0;unsigned long gokit_time_s(void){ return millis() / 1000;}char gokit_key1down(void){ unsigned long keep_time = 0; if (digitalRead(KEY1) == LOW) {  delay(100);  if (digitalRead(KEY1) == LOW)  {   keep_time = gokit_time_s();   while (digitalRead(KEY1) == LOW)   {    if ((gokit_time_s() - keep_time) > KEY_LONG_TIMER)    {     Last_KeyTime = gokit_time_s();     return KEY1_LONG_PRESS;    }   } //until open the key   if ((gokit_time_s() - Last_KeyTime) > KEY_LONG_TIMER)   {    return KEY1_SHORT_PRESS;   }   return 0;  }  return 0; } return 0;}char gokit_key2down(void){ unsigned long keep_time = 0; if (digitalRead(KEY2) == LOW) {  delay(100);  if (digitalRead(KEY2) == LOW)  {  delay(100);  if (digitalRead(KEY2) == LOW)  {   keep_time = gokit_time_s();   while (digitalRead(KEY2) == LOW) //until open the key   {    if ((gokit_time_s() - keep_time) > KEY_LONG_TIMER)    {     Last_KeyTime = gokit_time_s();     return KEY2_LONG_PRESS;    }   }   if ((gokit_time_s() - Last_KeyTime) > KEY_LONG_TIMER)   {    return KEY2_SHORT_PRESS;   }   return 0;  }  return 0; } return 0;}//室內報警監測char gokit_alarmdown(void){ unsigned long keep_time = 0; if (digitalRead(alarmPin) == LOW) {  delay(100);  if (digitalRead(alarmPin) == LOW)  {   keep_time = gokit_time_s();   while (digitalRead(alarmPin) == LOW) //until open the key   {    if ((gokit_time_s() - keep_time) > KEY_LONG_TIMER)    {     Last_KeyTime = gokit_time_s();     return ALARM_LONG_PRESS;    }   }   if ((gokit_time_s() - Last_KeyTime) > KEY_LONG_TIMER)   {    return ALARM_SHORT_PRESS;   }   return 0;  }  return 0; } return 0;}char gokit_keydown(void){ char ret = 0; ret |= gokit_alarmdown(); ret |= gokit_key2down(); ret |= gokit_key1down(); return ret;}void KEY_Handle(void){ /* Press for over than 3 second is Long Press */ switch (gokit_keydown()) {  case KEY1_SHORT_PRESS:   myGizwits.setBindMode(WIFI_PRODUCTION_TEST);   break;  case KEY1_LONG_PRESS:   myGizwits.setBindMode(WIFI_RESET_MODE);   break;  case KEY2_SHORT_PRESS:   myGizwits.setBindMode(WIFI_SOFTAP_MODE);   //Soft AP mode   break;  case KEY2_LONG_PRESS:   myGizwits.setBindMode(WIFI_AIRLINK_MODE);   //AirLink mode   break;  case ALARM_SHORT_PRESS:   alarmflag = ((alarmflag == 0) ? 1 : 0);   if (alarmflag)   {    digitalWrite(beepPin, LOW);   }   else   {    digitalWrite(beepPin, HIGH);   }   break;  case ALARM_LONG_PRESS:   digitalWrite(ledPin, HIGH); //設置為高電平   digitalWrite(relayPin1, HIGH); //設置為高電平   digitalWrite(relayPin2, HIGH); //設置為高電平   break;  default:   break; }}//獲取溫度數據int dht_11_gettemperature() { int chk = myDHT_11.read11(temhumPin); int value = myDHT_11.temperature; return value;}//獲取濕度數據int dht_11_gethumidity() { int chk = myDHT_11.read11(temhumPin); int value = myDHT_11.humidity; return value;}/** Serial Init , Gizwits Init @param none @return none*/void setup() { // put your setup code here, to run once: mySerial.begin(115200); pinMode(KEY1, INPUT_PULLUP); pinMode(KEY2, INPUT_PULLUP); pinMode(smokePin, INPUT); //設置為數字輸入模式 pinMode(movePin, INPUT); pinMode(alarmPin, INPUT_PULLUP); pinMode(firePin, INPUT); pinMode(lightPin, INPUT); //模擬量為輸入模式 pinMode(beepPin, OUTPUT); //設置為數字輸出模式 pinMode(ledPin, OUTPUT); pinMode(relayPin1, OUTPUT); pinMode(relayPin2, OUTPUT); pinMode(con_ledPin, OUTPUT); digitalWrite(beepPin, HIGH); //設置為高電平 myGizwits.begin();}void wifiStatusHandle(){ if (myGizwits.wifiHasBeenSet(WIFI_CON_ROUTER)) {  digitalWrite(con_ledPin, HIGH); //設置為低電平  digitalWrite(ledPin, HIGH); //設置為高電平  digitalWrite(relayPin1, HIGH); //設置為高電平  digitalWrite(relayPin2, HIGH); //設置為高電平 }}/** Arduino loop @param none @return none*/void loop() { //Configure network //if(XXX) //Trigger Condition //myGizwits.setBindMode(0x02); //0x01:Enter AP Mode;0x02:Enter Airlink Mode bool varW_Alarm = alarmflag;//Add Sensor Data Collection myGizwits.write(VALUE_Alarm, varW_Alarm); unsigned long varW_fire = analogRead(firePin);//Add Sensor Data Collection myGizwits.write(VALUE_fire, varW_fire); unsigned long varW_Move_Test = digitalRead(movePin);//Add Sensor Data Collection myGizwits.write(VALUE_Move_Test, varW_Move_Test); unsigned long varW_Tem = dht_11_gettemperature();//Add Sensor Data Collection myGizwits.write(VALUE_Tem, varW_Tem); unsigned long varW_Hum = dht_11_gethumidity();//Add Sensor Data Collection myGizwits.write(VALUE_Hum, varW_Hum); unsigned long varW_Light = analogRead(lightPin);//Add Sensor Data Collection myGizwits.write(VALUE_Light, varW_Light); bool varR_LED_OnOff = 0; if (myGizwits.hasBeenSet(EVENT_LED_OnOff)) {  myGizwits.read(EVENT_LED_OnOff, &varR_LED_OnOff); //Address for storing data  if (varR_LED_OnOff == 0)  {   digitalWrite(ledPin, HIGH);  }  else  {   digitalWrite(ledPin, LOW);  } } bool varR_Relay_1 = 0; if (myGizwits.hasBeenSet(EVENT_Relay_1)) {  myGizwits.read(EVENT_Relay_1, &varR_Relay_1); //Address for storing data  if (varR_Relay_1 == 0)  {   digitalWrite(relayPin1, HIGH);  }  else  {   digitalWrite(relayPin1, LOW);  } } bool varR_Relay_2 = 0; if (myGizwits.hasBeenSet(EVENT_Relay_2)) {  myGizwits.read(EVENT_Relay_2, &varR_Relay_2); //Address for storing data  if (varR_Relay_2 == 0)  {   digitalWrite(relayPin2, HIGH);  }  else  {   digitalWrite(relayPin2, LOW);  } } bool varR_beep = 0; if (myGizwits.hasBeenSet(EVENT_beep)) {  myGizwits.read(EVENT_beep, &varR_beep); //Address for storing data  if (varR_beep == 0 )  {   digitalWrite(beepPin, HIGH);  }  else  {   digitalWrite(beepPin, LOW);  } } KEY_Handle(); wifiStatusHandle(); myGizwits.process();}

5.1 在應用開發生成APP代碼包

通過Android Studio軟件導入項目進行編譯，因版本問題需要修改關鍵詞，compile 均替換為implementation，testcompile均替換為testimplementation，可參考以下代碼：

apply plugin: 'com.android.application'android {  compileSdkVersion 25  buildToolsVersion '28.0.2'  useLibrary 'org.apache.http.legacy'  defaultConfig {    applicationId "com.gizwits.opensource.appkit"    minSdkVersion 16    targetSdkVersion 25    versionCode 1    versionName "2.5.1.072715"    multiDexEnabled true  }  buildTypes {    release {      minifyEnabled false      proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.pro'    }  }}dependencies {  implementation fileTree(dir: 'libs', include: ['*.jar'])  implementation 'com.android.support.constraint1.1.0'  testImplementation 'junit4.12'  implementation 'com.android.support24.2.1'  implementation files('libs/BLEasyConfig.jar')  implementation files('libs/easylink2.0.jar')  implementation files('libs/GizWifiSDK.jar')  implementation files('libs/jpush-android-2.1.5.jar')  implementation files('libs/Lark7618SDK_noudp1606031910_0101.jar')  implementation files('libs/libammsdk.jar')  implementation files('libs/libForEElink.jar')  implementation files('libs/LSFSK_1.0.jar')  implementation files('libs/ltlink2.jar')  implementation files('libs/mta-sdk-1.6.2.jar')  implementation files('libs/OneShotConfig.jar')  implementation files('libs/open_sdk_r5756.jar')  implementation files('libs/pushservice-5.6.0.30.jar')  implementation files('libs/simpleconfigwizardlib.jar')  implementation files('libs/xUtils-2.6.14.jar')  implementation files('libs/zxing.jar')  implementation 'com.android.support25.3.0'  implementation 'com.yanzhenjie1.0.5'}

同時可參考基于機智云AIoT平臺的Android開源app修改教程

使項目成功編譯